WAAT WB1200 Turnkey PA System

Level up your live audio game with the WAAT WB1200 Turnkey PA. A solid full range 3-way system built to get 'em moving.

Boasting two of our WB1200(link) 12" coaxial mid/high tops and a best bang for your buck 2x12" Type O Paraflex Subwoofer(link), coupled with a 2000 watt 4-channel CVR amplifier and cables to get going immediately, this mid-field powerhouse of a system delivers the goods and then some.

With the coaxial tops housing purpose built passive crossovers you're able to dish out crystal clear highs and punchy, cohesive mid frequencies covering 80Hz-20kHz using a single amp channel per side. Putting in some work on the low end is one of our favorites, a single Paraflex 2x12" Type O Subwoofer. Don't let it's small stature fool you into thinking this horse can't kick! Two 12" drivers handling 35-100Hz in this Paraflex Type O box might surprise you.

The CVR DSP-2004 included with this rig outputs 2000 watts per each of its 4 channels @ 8ohm load, features advanced digital signal processing for precise tuning and sound control, and has the ability to be controlled remotely using a networked Windows PC. Plenty of power, complete control, and room to expand.. But more on that later. We're also including three 25ft lengths of 12AWG 4-wire speaker cable terminated with Neutrik NL4XX ends for industry standard connections and enough length to get your new rig set up how you want. Also, something worth mentioning, this whole rig can reach its full potential on a single 20A circuit! Meaning you are able to set up almost anywhere standard Edison wall plugs are available.

This setup comes pre-tuned with two optional deployment settings loaded into the amp. One with sub and one without for those gigs where a subwoofer isn't required or requested. For the latter, your tops will be crossed over lower and playing 50Hz-20kHz.

Pro-audio means streamlined future expansion and configuration capability! More tops? More amps? More subs? All possible and easy to integrate when you start with pro-audio from the beginning.

Want to put that last open amp channel to good use? Grab another subwoofer while you're here.

2x - WB1200 12" Coaxial with Passive Crossover (80Hz – 20,000Hz)
1x - 2x12" Type O Paraflex Subwoofer (35Hz – 120Hz) with grill, pole mount, and integrated handles.
1x - 4 channel amp pushing 2000 watts @ 8ohms - CVR DSP-2004
3x - 25ft 12AWG 4-conductor cable terminated with Neutrik NL4FXX

Optional Upgrade:
One is good. Two is better! Noticed you'd only be using 3 out of 4 amp channels? Want to utilize those WB1200s to the fullest? Make sure your subwoofer section can keep up! Two 2x12" subwoofers will guarantee you're never lacking the lows when you turn it up and push this system to its full potential!