HF 60x40 Horn

The HF 60×40 Horn by WAAT offers powerful and clear high-frequency sound reproduction with a tighter horizontal dispersion than our HF 90x40 Horn. Built to fit on top of the C3D Kick/Mids.

$1,075.00

The WAAT 60x40 Horn is comprised of a HOQS BH1 60H x 40V dispersion high frequency horn loaded with HOQS HF143N 1.4" compression driver with 80 watts of nominal power handling and a 3" voice coil.

Designed to fit on top of the Paraflex C3D Kick/Mids, these solid performers can deploy as singles, one per side, or splayed in pairs to expand coverage as needed.

What dispersion is right for your deployment?

If you're intending to expand your system and splay your kicks and horns then the 60x40 is a solid choice.

The 60x40 horn also works better in narrower/deeper spaces with tighter directivity to minimize unwanted reflections.

If you're looking for more coverage while only running one horn per side, the WAAT 90x40 Horn might be what you need.

Design Specs

  • Dimensions: 425mm x (600mm front / 383mm rear) x 1000mm
  • Shape: Trapezoid
  • Weight: 38 lbs
  • Driver Count: 1
  • Total Design Impedance: 8 Ohm

Operating Specs

• Nominal Coverage Horizontal: 60°
• Nominal Coverage Vertical: 40°
• Frequency Range: 800Hz -17,000Hz

Recommended Crossover Settings:

  • High Pass (HPF): 1KHz
Tags
Tags
High/HF Horn